Manufactured-Home HVAC Specialists
Mobile & Manufactured Home AC in Broward County
Manufactured homes cool differently: package units beside the home, mobile-home-rated equipment, belly-board ducts, and an envelope that gains heat fast. Abraham AC sizes and installs for how these homes actually behave — not how a site-built house calculator says they should.
Quick Answer
Most Broward manufactured homes cool with either a package unit (everything in one cabinet outside, ducted under the home) or a mobile-home-rated split system. Replacement must respect the home's duct design, tie-down and anchorage code, and the thinner envelope's faster heat gain — generic house equipment and sizing produce expensive disappointments here.
- Package units and mobile-home-rated splits
- Anchorage and code compliance for wind zones
- Under-home duct evaluation included in scoping
- Pricing reviewed before approved work begins
Package Unit Or Split: The Manufactured-Home Fork
The package unit — compressor, coils, and blower in one outdoor cabinet feeding the home's existing under-floor ducts — is the classic manufactured-home configuration: simple, serviceable, and designed for exactly this duct geometry. Splits rated for manufactured homes put a smaller air handler inside (closet or utility space) with a conventional condenser outside. We quote the configuration the home's ducts, space, and budget actually support; converting between them is possible but is a project, not a swap.
The Ducts Under Your Floor
Manufactured-home ducts run through the belly board under the floor — and decades of Florida humidity, sagging insulation, rodent adventures, and previous-owner repairs live down there. A replacement quote that never looked under the home missed the half of the system that decides your comfort. We evaluate the duct trunk and boots as part of scoping: sealing and repair down there frequently buys more comfort per dollar than an equipment tier upgrade.
Sizing The Thin Envelope Honestly
Manufactured homes gain and lose heat faster than site-built houses — less mass, thinner walls, more sun on the roof skin. That argues for honest load math, not bigger tonnage: oversized equipment short-cycles into the same clammy mediocrity it produces anywhere, just faster. Right-sizing with the envelope's reality priced in (and shade, skirting, and roof coatings acknowledged) is the difference between a quote and a guess.
Code, Tie-Downs, And The Paperwork
Outdoor equipment at a Broward manufactured home gets anchored to wind-zone code like any condenser — and the home's own tie-down and installation standards (HUD code for the home, state rules for the equipment) shape what passes inspection. Permits and inspections apply here exactly as at site-built homes, and they protect the same things: your insurance posture, your sale paperwork, and your equipment staying put in a storm.
Mobile Home AC Service FAQs
What kind of AC does a mobile home need?
A package unit feeding the existing under-floor ducts, or a split system specifically rated for manufactured homes. The home's duct design, available interior space, and budget pick between them — generic site-built equipment is the wrong answer to the question.
How much does a mobile home AC unit cost?
It depends on configuration (package versus split), tonnage, efficiency tier, duct condition under the home, and electrical scope. We review pricing after seeing the home and its ducts — quotes written without looking under the floor are missing half the job.
Why is my mobile home so hot even with the AC running?
Commonly: leaking or fallen belly-board ducts dumping cold air under the home, an envelope gaining heat faster than an aging unit can remove it, or equipment sized by guesswork. The duct evaluation usually finds the money — start there before buying tonnage.
Do package units last as long as split systems?
Comparable lifespans with honest maintenance — package units live entirely outdoors, so coil care and cabinet condition matter more in coastal air. Their virtue is serviceability: everything is in one place at ground level.
Does replacing a mobile home AC require a permit?
Yes — mechanical permits and inspections apply to manufactured homes in Broward municipalities just as elsewhere, including equipment anchorage for wind. The paperwork protects your insurance file and your sale documents.
Can you fix the ducts under my mobile home?
Yes — belly-board duct sealing, re-supporting, insulation repair, and boot reconnection are standard scope for us. It is unglamorous work that routinely outperforms equipment upgrades dollar for dollar in these homes.
